Laminate
flooring can change the look of your room. So what is stopping you? Learn to
install new laminate flooring.
Materials Required:
- Laminate flooring
- A shoe molding.
- Finishing putty to match
- Self-stick rubber base, black color.
- Transition strips a.k.a thresholds
- Miter saw with laminate blade
- Foam underlayment if there is not a pre-attached tape.
- Brad gun/ hammer and brad nails
- 90 degree/right angle square
- A compressor
- Hammer
- Crowbar (small and flat)
- Chalk line
- Jigsaw
- Knife
- Pencil
- Rubber mallet
Benefits from Lamination Flooring
Laminate
flooring is a composite material which is similar to plastic, so it is
scratch-resistant. Also, it does not wear and tears like hardwood lasting
nearly for decades. The Flooring has a click and locks together system, making
it simpler to install. You should use light-colored laminate flooring in small
rooms. The light-color would create a spatial illusion making the room look
larger and feel warmer. Another plus point is that you can install laminate
flooring over existing flooring.
Here
is a tip. Always buy more carpet than you require, in case you make a bad cut
you will not need to run back to store for some more.
Steps/Procedure:
- Clear the whole room. Use a hammer and chisel or a small crowbar to remove present shoe moldings, and rubber base from beneath the toe kick. Remember, while removing the shoe molding try not to damage the wall and existing base molding.
- Remove the flanges on radiator pipes only if it is necessary. After doing so, vacuum thoroughly and clean the floor.
- Follow the instructions of the manufacturer to lay out the foam underlayment correctly. You can save time on installation by buying flooring with pre-attached underlayment. Thus, you will not need to buy new carpet.
- Commence hardwood flooring along the most noticeable and prominent wall in the room at all times. Accordingly, if the place is not of perfect square shape, the crooked cut will be concealed under the cabinet's toe kick. To keep the floors' remain straight and square, lay the laminate away from the wall because the wall might be not straight. Measure the width of one piece of flooring away from the wall. Add 1/4 inch to it. Make a line by the chalk across the room. Start the first set of flooring from the chalk line and line up everything after it.
- Install the laminate flooring according to the manufacturer's instructions. Use the jigsaw to wedge any corner or pipe and Miter saw to cut the pieces in length. Set the height of the flooring in agreement with the height of the door.
- Use the miter saw to cut the shoe molding. Nail the molding to the baseboard along the room with a brad gun. Fill any remaining holes with finishing putty.
- Install rubber base under toe kicks. Cut the rubber base with the knife and stick it using an adhesive.
- Install the transition strips wherever the floor meets to carpet or the tile. Cut the pieces to fit and install them with a tube of glue.
You have shared a nice article here about the Laminate Flooring. Your article provides a very useful information and it is very beneficial for us. If you are interested to know more about the Floating Cork Flooring, Visit cancork.com
ReplyDeleteWow, What an Excellent post. I really found this to much informative. It is what I was searching for. I would like to suggest you that please keep sharing such type of info. vinyl floor experts singapore
ReplyDeleteYour information which you have shared here about laminate. It's a really well researched and very informative article. Keep providing more advice in the future like this. Thank you. Serapi Rugs
ReplyDeleteNice reading, I love your content. This is really a fantastic and informative post. Containing all information about laminate. floor sanding north shore sydney
ReplyDeleteThe article was up to the point and described the information very effectively. Thanks to blog author for sharing an informative post. Residential Epoxy Flooring
ReplyDeleteI am very happy to say that this is an interesting post. I learned new information from your article, you are doing a great job. Thanks for sharing this kind of blog. Bathroom countertops toledo
ReplyDeleteYou've provided quite good information here about High Performance Concrete Surface Preparation Waterloo. This is fantastic since it expands our knowledge and is also beneficial to us. Thank you for sharing this piece of writing.
ReplyDeleteThanks for the post, I believe you hit the nail right on the head. It is very nicely explained. I am highly impressed with your blog about Porcelain Floor Tile. Your article adds the best knowledge to users.
ReplyDelete